| |
 |
 |
2012-12-14
Presseinfo: David McAllister besucht Mahr |
| |
| |
Niedersächsischer Ministerpräsident würdigt Leistungen des Messtechnik-Herstellers Mahr
Am 12. Dezember 2012 besuchte David McAllister die Mahr GmbH am Firmensitz in Göttingen. Er holte damit einen Termin anlässlich des 150. Geburtstags des Herstellers für Messtechnik-Anlagen in 2011 nach, an dem der Ministerpräsident von Niedersachsen verhindert war.
more...
|
 |
 |
|
2012-12-12
Press release: Measuring straightness of gear shaft axis |
| |
| |
Expansion of the measuring function of evaluation unit MarCheck II: Measurement of axis straightness and total runout
On gear shafts, the parameters “axis straightness” and “total runout” are increasingly measured in quality assurance. All wave measuring instruments from Mahr now have the option to acquire these quality characteristics within a few seconds - even the proven low-cost device MarShaft MAN with the computer MarCheck II.
more...
|
|
 |
|
2012-11-09
Press release: Complete valve measurement in 61 seconds |
| |
| |
Quality assurance of valves directly in production, use of optical metrology and new pneumatic clamping device
Valves must always be made more precise in order to meet today's demands for a combustion engine. With the measuring system "MarShaft Scope", Mahr offers a solution in order to check the production quality of valves directly in production - in only one setup.
more...
|
|
 |
|
2012-11-02
Press release: Mahr apprentice is national winner for the second time in a row |
| |
| |
Mahr once again provides the national winner in the Industrial Mechanic apprentice trade at the Association of German Chambers of Commerce Industry and Commerce DIHK)
For the second time in a row, a Mahr apprentice is the national winner at the DIHK in the apprentice trade “Industrial Mechanic”. With the best scores, the Mahr apprentice Florian Siegel was successful nationwide.
more...
|
|
 |
|
2012-10-22
Press release: More comfort working with dial gages |
| |
| |
Mahr offers new dial gages with radio and reference system for faster measurements and more freedom of movement
A new generation of dial gages simplifies everyday life and practice in quality assurance. The application specialist Mahr now has gages on the market, which, thanks to the reference system must no longer be set to zero and sends data to the computer via radio frequency.
more...
|
|
 |
|
2012-10-15
Press release: Practical technical colloquia for quality inspection |
| |
| |
Event series from the Mahr Academy addresses questions on modern quality assurance in manufacturing plants, expert forum for decision-makers
Beginning this fall, the Mahr Academy is offering ‘MarExpert colloquia’ that address the quality assurance in practice – from the impact of the new standards to modern methods of measurement.
more...
|
|
 |
|
2012-10-08
Presseinfo: Hochgenau-Kugelführungen auf der MOTEK |
| |
| |
Mahr stellt Branchenlösungen für MarMotion Kugelführungen vor
Zuverlässigkeit und absolut spielfreier Lauf: Das zeichnet die MarMotion Hochgenau-Kugelführungen von Mahr aus. Der Applikationsspezialist präsentiert auf der Motek vom 8. bis 11. Oktober 2012 in Stuttgart moderne Branchenlösungen für Kugelführungen und stellt den neuen Online-Produktkatalog vor.
more...
|
|
 |
|
2012-09-20
Press release: 10,000 calibration certificates for the roughness standard PRN-10 |
| |
| |
Mahr in Göttingen sells many standards for the monitoring, adjusting and calibration of length measuring units
Dimensional measuring equipment must be calibrated and adjusted regularly. Mahr offers many standards for this purpose. The bestseller among these standards: the roughness standard PRN-10. Now the ten-thousandth calibration certificate for this standard has been issued.
more...
|
|
 |
|
2012-09-18
Press release: Camshaft measurement as an expansion package for MarWin |
| |
| |
Newly developed measuring wizards enable a more cost-efficient and efficient evaluation and analysis of camshafts
Camshafts make a significant contribution in realizing energy-efficient drive units in a modern powertrain. To meet the increasing demands for precision in the production of camshafts, Mahr has further developed its proven solutions for the measurement and evaluation of form and location tolerances for the testing of the cam shape on camshafts.
more...
|
|
 |
|
2012-09-13
Presseinfo: Sonderpreis für familienfreundlichen Betrieb |
| |
| |
SüdniedersachsenStiftung und Niedersächsische Sozialministerin würdigen Mahr für Engagement bei der Vereinbarkeit von Familie und Beruf
Für „Nachhaltige Entwicklung der Familienfreundlichkeit“ ist Mahr von der SüdniedersachsenStiftung ausgezeichnet worden.
more...
|
|
 |
|
2012-08-31
Press release: Mahr awarded top credit rating |
| |
| |
Hoppenstedt ranks the application specialist as one of the leading German companies in terms of creditworthiness
The independent rating agency Hoppenstedt distinguished Mahr with the credit index 1 - only 4.4 percent of the approximately 4.7 million audited companies have achieved this result. Thus, the Göttingen application specialist for metrology belongs to the leading companies in Germany in regards to its creditworthiness.
more...
|
|
 |
|
2012-08-27
Press release: Mahr opens new customer center in Esslingen |
| |
| |
Mahr invests in its Esslingen site, modernization and expansion
Mahr has extensively modernized its headquarters in Esslingen. The offices, warehouse and the customer area have been expanded and equipped according to the most modern standards. The new customer center and showroom were ceremoniously opened during an advisory board and shareholders’ meeting.
more...
|
|
 |
|
2012-08-07
Press release: Complete optical and tactile crankshaft measurements |
| |
| |
Crankshaft measuring station MarShaft MAN combines tactile and optical metrology, matrix camera measures characteristics within seconds
The production quality of crankshafts can now be tested more quickly and comprehensively. The shaft measuring station MarShaft MAN from the application specialist Mahr now offers an optical sensor in addition to a tactile probe.
more...
|
|
 |
|
2012-07-31
Press release: Future-oriented roughness evaluation |
| |
| |
Cost-efficient entry into surface measurements, measuring unit combined with Software MarWin, cable-free thanks to Bluetooth
MarSurf XR 1 is the entry into the top class of surfaces metrology. The PC-based measuring instrument of the application specialist Mahr unites for the first time the mobile measurement of surfaces with the possibilities of the modern and powerful MarWin evaluation software.
more...
|
|
 |
|
2012-07-03
Press release: World novelty: 3D contour standard for shaft measuring units |
| |
| |
Patented 3D contour standard KN 100 S from Mahr for the quality assurance of rotation symmetrical workpieces
The 3D contour standard KN Mahr S 100 enables the easy and quick calibration of shaft, form and contour measuring stations for rotationally symmetrical workpieces.
more...
|
|
 |
|
2012-06-26
Presseinfo: Videos zeigen moderne Qualitätssicherung |
| |
| |
Praxis live: Mahr bietet online Applikations-Videos zu Messlösungen in verschiedenen Branchen
Vier neue Applikations-Videos zeigen die Möglichkeiten, die moderne Messtechnik bei der Qualitätssicherung bietet. Gezeigt wird die gesamte Bandbreite von Mahr: optische und taktile Messlösungen für Fertigung und Messraum in verschiedenen Branchen.
more...
|
|
 |
|
2012-06-18
Presseinfo: Mahr unterstützt HAWK mit Messmaschine |
| |
| |
Know-how-Transfer zwischen Hochschule und Mahr, bereits viele Messergebnisse und Abschlussarbeiten
Im Jahr 2010 hat der Applikationsspezialist Mahr den Feinmessraum der HAWK (Hochschule für angewandte Wissenschaft und Kunst (HAWK), Fakultät Naturwissenschaften und Technik) in Göttingen mit dem modernen optischen Wellenmessplatz „MarShaft Scope“ ausgestattet.
more...
|
|
 |
|
2012-06-12
Press release: New generation of dial gages with radio system |
| |
| |
Mahr dial gages with reference system and radio system for fast and uncomplicated use in quality assurance
A new generation of dial gages offers more measuring comfort. The application specialist Mahr has now brought gages onto the market that thanks to the patented reference system must no longer be set to zero and send data by radio to the computer.
more...
|
|
 |
|
2012-06-06
Press release: Combined contour and roughness measurements |
| |
| |
World novelty at the Control: high-precision measuring stations MarSurf LD 130/ LD 260 – large measuring volume, innovative probe system, tremendous time savings
For combined contour and roughness measurements, the application specialist Mahr has developed the new high-end measuring stations MarSurf LD 130 and LD 260. The high measuring and positioning speeds are excellent, as well as the innovative probe technology.
more...
|
|
 |
|
2012-05-21
Press release: Roughness depth measurement via Smartphone |
| |
| |
World novelty: Roughness measurement combines Mahr technology with the advantages of a Smartphone
The future of roughness measurements has already begun: The innovative measuring system MarSurf One combines Mahr technology with the comfort of a Smartphone.
more...
|
|
 |
|
2012-05-15
Presseinfo: Viele konkrete Projekte angebahnt |
| |
| |
Bilanz zur Control 2012: sehr gut besuchter Messestand, viele Entscheider mit Budgets für konkrete Projekte
Die Control 2012 war für Mahr eine der erfolgreichsten Messen: Auf dem sehr gut besuchten Messestand wurden viele Projekte angebahnt. Große Aufmerksamkeit erregte die Kombination von Messtechnik mit einem Smartphone.
more...
|
|
 |
|
2012-04-24
Press release: Active worldwide as application specialist |
| |
| |
Control 2012: Mahr presents itself with application islands as partner of different industries – even closer to the customer
more...
|
|
 |
|
2012-04-13
Press release: Measurement of Very Small Workpieces |
| |
| |
New at the Control 20120: Mahr develops high-precision measuring solution for the smallest spheres, plates, cones or cylindrical parts
Workpieces are increasingly shrinking in size – in combustion engines in the automotive industry as well as in medical or precision engineering.
more...
|
|
 |
|
2012-03-08
Press release: Measurement of thin-walled workpieces |
| |
| |
High-precision length measurement station Precimar PLM 600-2 from Mahr determines diameter values for measuring force 0 Newton
In quality control, thin-walled workpieces need instruments that do not deform the specimen. The application specialist Mahr, in conjunction with the highly accurate precision length measuring machine Precimar PLM 600-2 offers a measurement procedure that enables the customer to receive results on deformable workpieces without determining the influence of the measuring force.
more...
|
|
 |
|
2012-02-28
Press release: New Measuring Concept for the Turbocharger Shaft |
| |
| |
New: Mahr offers an innovative measuring concept for the turbocharger shaft with “MarShaft Scope” for the measurement of surface shape on the turbocharger vane
The turbocharger has become increasingly important in passenger cars worldwide – in order to increase motor performance as well as to meet the required CO2 reductions.
more...
|
|
 |
|
2012-02-22
Press release: Rack and Pinion: Getting Down to the Tooth of the Matter |
| |
| |
Quality assurance of rack and pinions for electric steering with Metrology from Mahr
Electric steering systems are the future of passenger cars. They consume much less energy, are made of a lighter and simpler construction. Automotive suppliers of steering systems check the quality of their racks and pinions for electric steering systems etc. with metrology from the application specialist Mahr.
more...
|
|
 |
|
2012-02-06
Press release: Practice-oriented tool measurement |
| |
| |
The requirements for the measurement of tools in the grinding shop are varied. On the one hand, a complete measurement is required, which means the measurement of the cutter geometry, the flute parameters and the characteristics of the tool end. All this should be as easy and, of course, as fast as possible. On the other hand, it is also important that individual characteristics such as diameter, point angle and step length are easily displayed. Just as we know it from the profile projector or measuring microscope.
more...
|
|
 |
|
2012-01-27
Press release: Kelvin newly defined with Mahr measuring accuracy |
| |
| |
Physikalisch-Technische Bundesanstalt (PTB) defines the unit Kelvin with the help of the reference formtester MarForm MFU 110 WP from Mahr
The Mahr reference formtester MarForm MFU 110 WP is one of the devices it uses for this purpose. Due to the tactile and optical measuring accuracy of this technology, the PTB was able to reach its targeted goal even more exactly.
more...
|
|
close
