The MarShaft SCOPE plus is a universal, fully automatic optical shaft measuring system for testing rotationally symmetrical workpieces.
The MarShaft SCOPE plus has a highly accurate roundness measuring axis (C), a vertical measuring axis (Z) and a horizontal measuring axis (X).
A tactile measuring system with an inductive measuring probe is available as an option, for measuring radial and axial run-out, for example. The measuring device is calibrated to the optical measuring system, so it can perform tactile and optical measuring tasks in combination.
The new MarWin EasyShaft software provides a high level of flexibility and exceptionally user-friendly operation.
The measuring sequences are carried out fully automatically, free from operator influences.
The MarShaft SCOPE plus is suitable for use in both the harsh workshop environment and in the inspection room. Zoom functions allow the smallest details to be measured, which with conventional measuring methods are difficult if not impossible to test.
The MarShaft SCOPE plus has a highly accurate roundness measuring axis (C), a vertical measuring axis (Z) and a horizontal measuring axis (X).
A tactile measuring system with an inductive measuring probe is available as an option, for measuring radial and axial run-out, for example. The measuring device is calibrated to the optical measuring system, so it can perform tactile and optical measuring tasks in combination.
The new MarWin EasyShaft software provides a high level of flexibility and exceptionally user-friendly operation.
The measuring sequences are carried out fully automatically, free from operator influences.
The MarShaft SCOPE plus is suitable for use in both the harsh workshop environment and in the inspection room. Zoom functions allow the smallest details to be measured, which with conventional measuring methods are difficult if not impossible to test.
- Automatic measuring procedure
- Matrix camera, 1280 x 1024 pixels
- User-friendly touchscreen operation
- One measuring instrument for multiple measuring tasks
- Good workshop compatibility
- MarWin EasyShaft software provides a high level of flexibility and user-friendly operation
- Technical data
- Applications
- Options
Diameter error limit (X) (µm) | (1.0 + L/125) L in mm (at 20°C ± 1°C on reference standard) |
---|---|
Drives | Servo motors |
Lens | Telecentric precision lens High-resolution CCD array |
Length error limit (Z) (µm) | (2 + L/125) L in mm (at 20°C ± 1°C on reference standard) |
Angle resolution (°) | 0.01 to 0.0001 |
Measuring range diameter (X) (mm) | 80 or 120 |
Workpiece weight (max.) in kg (text) | 15 (optional 30) |
Length/diameter resolution (mm) | 0.01 to 0.0001 |
Measuring range length (Z) (mm) | 350 / 750 / 1000 |
Typical workpieces
- Turned parts
- Tripods
- Transmission shaft
- Rack
- Axle journal
- Hollow shaft
- Drive shaft
- Camshaft
- Turbocharger shafts
- Bone screws
- Worm gears
- Balance shafts
- Hydraulic parts
- Valves (diesel engine)
- and much more
- Tactile measuring unit for measuring radial run-out and axial run-out
- Temperature compensation
- Thread measurement
- Turbocharger shaft measurement
- Manual control panel
- Signal lamp
- Barcode scanner
- MarWin Professional Shaft software
- QS-Stat interface