The PLM-E precision length measuring machine is an Abbe compliant comparator mounted on highly homogeneous rigid granite in a horizontal configuration
- Sensitive adjustment in 5 axes, and object table with a loading capacity of 35 kg
- PC-based, multi-axis machine control, including PC workstation and 828 WIN "Free measurement" basic software
- Simple operating procedure by means of measuring force-adjusted and joystick-controlled measuring slides with progressive deflection characteristic and automatic contact detection
- Automatic detection of outside and inside measurements and computer-aided search for reversal points
- The motorized measuring slide allows for high travel speeds
- The CNC-controlled vertical and cross adjustment of the universal measuring table facilitates highly efficient measuring
- State-of-the-art machine control (MarEcon)
- Recording, processing, logging and transfer of measurement data via powerful software and menu-driven controls
- Software compensation of thermal dimensional deviations
- Very easy to set the measuring force using the software
- Aerostatic guides for all slides mounted on the machine bed ensure low measurement uncertainties
- Electronic generation of measuring force and automatic contacting
- Subjective influences largely eliminated and unintended collisions with the test piece avoided.
- Automatic bore and inner thread measurement
- Automatic TY adjustment: What’s unique is that a manual TY-adjustment is still possible
- Motorized tilting axis (TB) for alignment. Alignment is carried out via the manual control panel or using the 828 WIN software.
- A factory calibration or DAkkS/DKD calibration is available for the Precimar PLM-E
- Technical data
- Applications
- Accessories
Measuring range for outer measurement [mm] | 0 bis 600 |
---|---|
Measuring range for inner measurement [mm] | 0,5 to 445 |
Direct measuring range [mm] | 200 |
Position deviation / error limit (L in mm) [µm] * | ≤ (0.07 + L/2000) |
Measuring uncertainty MPEE1 (L in mm) [µm] | ≤ (0,085 + L/1500) |
Measuring forces [N] | 0 to 13.9 |
Repeatability [µm] | ≤ 0.05 |
Contacting speed with joystick (max) | 8 mm/s |
Device length [mm] | 1660 |
Mass [kg] | 480 |
Table surface (A x B) mm | 150 X 300 |
Calibration of:
- Plain plug gages and gage rings
- Setting gage rings
- Snap gages
- Spherical gage blocks, internal micrometers
- Gage blocks
- Thread gages
- Taper thread gages
- Gear gages
- Dial indicators
- Dial comparators
- 2 point bore gages
- Outside micrometers
- 2 point inside micrometers
- Precision length measurement
- Measurement of thin-walled and deformed workpieces
- Large number of accessory kits and modular components for completing a wide variety of measuring tasks, including the measurement of:
- Thread gages
- Conical thread gages
- Gears
- Thread pitches